1/350 Scale Space Battleship Yamato by Hachette

1/350 Scale Space Battleship Yamato by Hachette

Sponsor

Sponsor
 

1/350 Scale Space Battleship Yamato by Hachette

Postby Valkyrie Hunter D » Fri Apr 03, 2020 8:46 am

This is a project I've been working on before I joined these forums, the very first partworks kit I got sucked into-I just had to get into it. Some background info: Space Battleship Yamato is a Japanese animated series that aired in 1974 and was translated in English for the Western audience five years later under the new name of Starblazers. It tells the story of the Yamato, a starship built from the carcass of the WWII battleship, and its crew whose mission is to go to the planet Iscandar to retrieve a device which could cleanse the Earth of radiation that was left from the bombing of another alien race. The story of the Yamato spawned several movies and reboots, with the latest one being Yamato 2199, released in 2012. Yamato 2199's story continues with Yamato 2202 (2017) and the upcoming 2205. This partworks kit is based on the Yamato's design from 2202, which doesn't really deviate too much from the original design from the 70's. Hachette's Yamato 2202 run is scheduled for 110 issues, with the current issue being #62. This is what the completed Yamato will look like:

358a20.JPG.jpg
358a20.JPG.jpg (113.1 KiB) Viewed 1371 times


This is where I am on this project, up to issue #55:

20200401_231810_copy_1328x747.jpg
20200401_231810_copy_1328x747.jpg (231.47 KiB) Viewed 1371 times


All the panels are metal, so it's a heavy sumbitch.

#56 gives you one of the side torpedo tube openings and shows you what the typical fiber optic setup looks like for the lighting:

20200402_000419_copy_3209x2988_copy_802x747.jpg
20200402_000419_copy_3209x2988_copy_802x747.jpg (154.1 KiB) Viewed 1369 times


#57 was a no build issue, it gives you a big motor for rotating one of the main guns. #58 gives you a red centerline panel and shows you how each panel is attached with its own metal bracket:

20200402_001539_copy_2332x2554_copy_583x638.jpg
20200402_001539_copy_2332x2554_copy_583x638.jpg (120.13 KiB) Viewed 1369 times


This panel is attached to the previously shown panel with the torpedo tube openings:

20200402_002837_copy_1328x747.jpg
20200402_002837_copy_1328x747.jpg (188.4 KiB) Viewed 1369 times


#59 is a big piece of the deck which will be the base for smaller AA guns. One of the previously assembled main guns is attached to this deck along with its motor from #57:

20200402_003233_copy_1328x747_copy_1247x725.jpg
20200402_003233_copy_1328x747_copy_1247x725.jpg (161.64 KiB) Viewed 1369 times


#60 sets up a side panel that goes underneath the AA guns:

20200402_004748_copy_3383x2988_copy_845x746.jpg
20200402_004748_copy_3383x2988_copy_845x746.jpg (110.59 KiB) Viewed 1369 times


That's all I got for now, but let me end with some tips that I wish I knew of before starting this build:

-Do get a long necked micro screwdriver, preferably with a magnetized tip. There are many times that a screw will have to be buried in deep, narrow spots to secure the panels.

-Long tweezers with bent curved tips come in handy when installing lighting parts.

-Pay attention to the length of the optic fibers. So far a few issues have fibers of different lengths, and it was easy to overlook which one is needed for a specific step.
User avatar
Valkyrie Hunter D
Corporal
Corporal
 
Posts: 40
Joined: Sat Feb 22, 2020 7:56 am
Karma: 4

Re: 1/350 Scale Space Battleship Yamato by Hachette

Postby booth » Wed Apr 15, 2020 8:59 am

Thank you, I am looking forward to your build. Its looks to be a superb model
Well done
booth
Sergeant Major
Sergeant Major
 
Posts: 352
Joined: Sat Jul 02, 2011 12:20 pm
Karma: 33

Re: 1/350 Scale Space Battleship Yamato by Hachette

Postby Valkyrie Hunter D » Mon Sep 28, 2020 8:07 am

booth wrote:Thank you, I am looking forward to your build. Its looks to be a superb model
Well done


Thanks, so far it IS a superb model!

The Covid months have left a huge amount of my issues languishing overseas, but now they're here, so onwards we go!

#61 allows one secondary gun battery to be completed and provides fiber optic cable. There are two pairs of cable, supposedly one 35 cm in length, and the other is 30 cm. I had to measure each pair and make sure I used them in the right steps.
20200927_235741_copy_1066x747.jpg
20200927_235741_copy_1066x747.jpg (170.73 KiB) Viewed 544 times

My cable pairs actually measure at 25 cm and 19 cm. I used the longer pair for the appropriate step. I'm hoping this won't be a spot of trouble later.

I don't think I mentioned it before, but the circular bits that get illuminated by the cables are mega tiny and easy to lose. I highly recommend tweezers and a light hand when fitting them onto the hull parts.

#62
: Not much here, just a motor for the gun battery from the previous issue:
20200928_010816_copy_1328x747.jpg
20200928_010816_copy_1328x747.jpg (215.63 KiB) Viewed 542 times


#63: Starboard torpedo tube ports to be attached to a hull piece from #60. Also a magnet for the winglets (not provided yet).
20200928_012513_copy_1328x747.jpg
20200928_012513_copy_1328x747.jpg (232.47 KiB) Viewed 542 times


#64: A no- build issue: just a gear and a big motor.

#65: Parts to complete the torpedo tube ports from #63 and adds lighting to the assembly:
20200928_014624_copy_1094x746.jpg
20200928_014624_copy_1094x746.jpg (185.34 KiB) Viewed 540 times

This step had a few annoying factors going on:
1). Tiny lighting lenses
2). Optic cables of three different lengths
3). A magnet strong enough to attract the tiny screws you're trying to drill home.
4). Used parts from previous issues that I completely forgot about. Tiny parts.
5). More tiny parts to lay aside for who knows how long.
Despite this, it all went swimmingly:
20200928_023212_copy_1328x747.jpg
20200928_023212_copy_1328x747.jpg (187.03 KiB) Viewed 540 times


#66: Adds the bottom half of the assembly from #63:
20200928_030152_copy_1174x747.jpg
20200928_030152_copy_1174x747.jpg (154.16 KiB) Viewed 540 times

20200928_030859_copy_1328x747.jpg
20200928_030859_copy_1328x747.jpg (147.88 KiB) Viewed 540 times


#67: Lighting cables and bulbous structures for the bottom half of the hull are given. Also an actual LED for an ejection port of some sort on the port side is provided:
20200928_155255_copy_1209x747.jpg
20200928_155255_copy_1209x747.jpg (171.93 KiB) Viewed 532 times

A lens from issue 65 was taken from its sprue here, and there are two different screw sizes to take note of. The tiny ejection port door is not on any secure hinge. It's secured and pivots by friction alone from two raised points on the upper edge. It'll stay on its own for display purposes, but I removed it for now because I fear I'll lose it during assembly. The are actually several parts like this that I set aside like the anchors and torpedo tube doors on the bow.
20200928_161753_copy_1328x747.jpg
20200928_161753_copy_1328x747.jpg (185.55 KiB) Viewed 532 times

On a side note, this was the first issue I ran into that didn't have any illustrations or articles from the show. Instead, I get an ad for the Blu Ray release of the anime-kinda lame.

#68: This looks like a bottom centerline panel with one lighting point-an easy step:
20200928_164929_copy_1328x747.jpg
20200928_164929_copy_1328x747.jpg (162.46 KiB) Viewed 532 times

The last clear lens from #65 was used and left an empty sprue.
Last edited by Valkyrie Hunter D on Tue Sep 29, 2020 4:41 am, edited 5 times in total.
User avatar
Valkyrie Hunter D
Corporal
Corporal
 
Posts: 40
Joined: Sat Feb 22, 2020 7:56 am
Karma: 4

Re: 1/350 Scale Space Battleship Yamato by Hachette

Postby steve131 » Mon Sep 28, 2020 9:07 pm

Looking good so far, hull looks similar to Hachette Bismarck but better fit . Enjoying this build.
User avatar
steve131
Brigadier
Brigadier
 
Posts: 4315
Joined: Fri Aug 17, 2012 10:22 am
Karma: 65

Re: 1/350 Scale Space Battleship Yamato by Hachette

Postby Valkyrie Hunter D » Tue Sep 29, 2020 1:18 am

steve131 wrote:Looking good so far, hull looks similar to Hachette Bismarck but better fit . Enjoying this build.


Thanks, steve. That Bismarck is a beast as well. Hachette must be enamoured with it having released two models of it.

#69: More bulbous structures for the bottom half of the hull, and another LED that mirrors the one from issue 67:
20200928_170105_copy_1328x747.jpg
20200928_170105_copy_1328x747.jpg (190.87 KiB) Viewed 532 times


#70: Parts that set up the mechanism for the torpedo tube port doors are given. A few small parts are left over for later steps.
20200928_185203_copy_1328x747.jpg
20200928_185203_copy_1328x747.jpg (198.66 KiB) Viewed 529 times

20200928_190219_copy_1328x747.jpg
20200928_190219_copy_1328x747.jpg (223.05 KiB) Viewed 529 times


#71 Not a lot of parts here, just three sizes of screws and a motor for the torpedo tube doors:
20200928_193340_copy_1328x747.jpg
20200928_193340_copy_1328x747.jpg (228.43 KiB) Viewed 529 times

The difficulty level ramps up a bit for the assembly involved. The panels assembled from the past recent issues come together, and the small parts and metal tension cable from #70 come into play to mount a motor:
20200928_202630_copy_1328x747.jpg
20200928_202630_copy_1328x747.jpg (240.66 KiB) Viewed 529 times

Snaking the tension cable through the right spots and installing the stops on each end proved to be a pain. Magnetized, long necked screwdrivers made assembling the finished result a breeze:
20200928_203326_copy_952x746.jpg
20200928_203326_copy_952x746.jpg (161.91 KiB) Viewed 529 times


#72: Gives you parts for the underside fin and the base for the secondary bridge:
20200928_225817_copy_1115x747.jpg
20200928_225817_copy_1115x747.jpg (159.94 KiB) Viewed 524 times

Just don't be a dummy like me and almost glue the fin backwards.
20200928_232513_copy_839x690.jpg
20200928_232513_copy_839x690.jpg (119.31 KiB) Viewed 524 times

A small tip regarding the optic cables (SL and ACL): it will make things easier later on to direct those cables to go underneath the red plastic motor mount and point them towards the rear of the model.

#73 is the top portion of the second bridge and its lighting:
20200929_011423_copy_1328x747.jpg
20200929_011423_copy_1328x747.jpg (164.91 KiB) Viewed 523 times


#74 Works on the interior of the second bridge with parts left over for later. Also included are what look to be braces for the stands to hold up the partially assembled Yamato. It still looked precarious to me so I just left mine on its side.
20200929_013820_copy_1328x747.jpg
20200929_013820_copy_1328x747.jpg (194.57 KiB) Viewed 520 times
Last edited by Valkyrie Hunter D on Wed Sep 30, 2020 8:22 am, edited 1 time in total.
User avatar
Valkyrie Hunter D
Corporal
Corporal
 
Posts: 40
Joined: Sat Feb 22, 2020 7:56 am
Karma: 4

Re: 1/350 Scale Space Battleship Yamato by Hachette

Postby Valkyrie Hunter D » Tue Sep 29, 2020 9:09 pm

#75 is quite an intricate step. You'll find interior parts for the second bridge and a walkway ramp. Note the etched handrail parts. Yeah, this is gonna be fun.
20200929_022015_copy_1328x747.jpg
20200929_022015_copy_1328x747.jpg (239.47 KiB) Viewed 509 times

The holes where the handrails go are not uniform in depth. I had to line them up as best as I could:
20200929_030902_copy_2885x2689_copy_721x672.jpg
20200929_030902_copy_2885x2689_copy_721x672.jpg (64.29 KiB) Viewed 509 times

The assemblies from #72 and #74 come together:
20200929_033324_copy_857x747.jpg
20200929_033324_copy_857x747.jpg (106.46 KiB) Viewed 508 times

The ramp was tedious to put together. Not only because of those handrails, but there are also two piston-like shafts that have to be lined up at the same time when the parts come together. If all goes well, the ramp comes down when a tension cable is pulled upward:
20200929_040308_copy_788x641.jpg
20200929_040308_copy_788x641.jpg (83 KiB) Viewed 508 times

The finished cross section. Can't wait to clean up all those wires and optic cables:
20200929_125519_copy_758x747.jpg
20200929_125519_copy_758x747.jpg (139.71 KiB) Viewed 508 times


#76 installs the motor and lever for the cable that opens the loading ramp using parts left over from #75:
20200929_160541_copy_1237x747.jpg
20200929_160541_copy_1237x747.jpg (207.5 KiB) Viewed 500 times

I suggest threading the tension cable through the two parts (the gray spindle and the mount) and putting them together inside the hull. There is so little maneuvering room to thread that cable otherwise. It sure is getting messy in there:
20200929_200455_copy_1328x747.jpg
20200929_200455_copy_1328x747.jpg (183.81 KiB) Viewed 500 times
User avatar
Valkyrie Hunter D
Corporal
Corporal
 
Posts: 40
Joined: Sat Feb 22, 2020 7:56 am
Karma: 4

Re: 1/350 Scale Space Battleship Yamato by Hachette

Postby Valkyrie Hunter D » Wed Sep 30, 2020 7:35 am

#77: Steps like these are an ordeal, but oh so satisfying in the end. Pictured is one of the LED modules that illuminate all the fiber optic cables that run all over the hull:
20200929_210122_copy_1298x747.jpg
20200929_210122_copy_1298x747.jpg (223.15 KiB) Viewed 496 times

The cables are grouped in clusters of four and tapered down into a two part plug:
20200929_232146_copy_596x598.jpg
20200929_232146_copy_596x598.jpg (112.22 KiB) Viewed 496 times

The excess cable lengths are cut, then the plug is inserted into a specific LED module cavity. You have to make sure you have enough slack to finagle the plug into the module. The instructions say to cut 1.5 cm of excess cable to make this happen. With my ham hands, it's already difficult as it is to manipulate parts in that hull interior, so I recommend cutting even less than 1.5 cm to give yourself more flexibility in optic cable management.

Coercing the cables to go in a specific direction was made difficult by the fact that I just didn't want to break anything. I always had to find a good hand hold where I wasn't applying force to the secondary bridge or the underside fin. Getting the wires from other parts out of the way will clear the space up, but take care with the circuit boards: those solder points can be weak.

I recommend grouping and plugging the orange flagged "ACL" cables first. Plugging in the white flagged "SL" cables first will give you less room for the ACL cables to be plugged in:
20200929_231901_copy_1065x747.jpg
20200929_231901_copy_1065x747.jpg (148.75 KiB) Viewed 496 times

It's certainly a lot less chaotic in there now:
20200929_232749_copy_1033x747.jpg
20200929_232749_copy_1033x747.jpg (184.49 KiB) Viewed 496 times


#78 gives parts and three different screw sizes to assemble the base of the AA guns:
20200930_005027_copy_724x581.jpg
20200930_005027_copy_724x581.jpg (94.78 KiB) Viewed 492 times

Do not drive the screws in this step too deep:
20200930_014450_copy_632x730.jpg
20200930_014450_copy_632x730.jpg (69.82 KiB) Viewed 492 times

If they get in too tightly, the control arms won't swing easily. I don't know how strong the motor will be for this mechanism, but I erred on the side of caution and kept the screws loose enough so the arms don't come out of place.

Putting the plates in order took a bit of trial and error in making sure all the posts and pegs all lined up. If all goes well, sliding the bottom plate forward and back should rotate ALL the posts.
20200930_014358_001_copy_1328x747.jpg
20200930_014358_001_copy_1328x747.jpg (133.15 KiB) Viewed 492 times


#79 is all about the turrets for the AA gun deck:
20200930_164131_copy_1209x747.jpg
20200930_164131_copy_1209x747.jpg (174.28 KiB) Viewed 483 times

Only four are attached to the deck from issue #59. It looks like they won't be attached to the base assembled in the previous issue:
20200930_170539_copy_1094x704.jpg
20200930_170539_copy_1094x704.jpg (116.65 KiB) Viewed 483 times
User avatar
Valkyrie Hunter D
Corporal
Corporal
 
Posts: 40
Joined: Sat Feb 22, 2020 7:56 am
Karma: 4

Re: 1/350 Scale Space Battleship Yamato by Hachette

Postby Valkyrie Hunter D » Thu Oct 01, 2020 2:27 am

#80 provides the motor that will rotate the AA guns:
20200930_173321_copy_617x584.jpg
20200930_173321_copy_617x584.jpg (57.43 KiB) Viewed 480 times

The big gear and mounting plate from #78 were used. I figure this was the last chance to make sure the posts and control plate from #78 were working like they should before getting held in a fixed position by the main gear. Before securing the motor, the gear has to be fixed in this position:
20200930_174446_copy_660x677.jpg
20200930_174446_copy_660x677.jpg (58.71 KiB) Viewed 480 times

The instructions point out that the peg on the main gear has to be inserted into the slot on the control plate when securing the motor:
20200930_180113_copy_756x532.jpg
20200930_180113_copy_756x532.jpg (57.22 KiB) Viewed 480 times

Make sure the motor mounting plate is oriented correctly when attaching it to the assembly from #78:
20200930_181110_copy_743x674.jpg
20200930_181110_copy_743x674.jpg (75.1 KiB) Viewed 480 times


#81 unfortunately did not continue with the AA gun deck as I hoped. It gave another set of AA turrets and one winglet:
20200930_184800_copy_1080x492.jpg
20200930_184800_copy_1080x492.jpg (104.75 KiB) Viewed 478 times

Gluing the magnets is the only assembly step here. Each magnet has an "S" printed on one of its surfaces. The "S" has to pointed in a specific direction for each magnet when gluing them to the winglet, as shown by the red arrows:
20200930_191639.jpg
20200930_191639.jpg (193.18 KiB) Viewed 478 times


#82 gives parts for the other winglet and screws to attach the cross section that's been coming together since #56:
20200930_194206_copy_1068x411.jpg
20200930_194206_copy_1068x411.jpg (83.79 KiB) Viewed 475 times

It was not an easy task to get that cross section screwed together:
20200930_224613_copy_1144x672.jpg
20200930_224613_copy_1144x672.jpg (145.2 KiB) Viewed 475 times

It gets so heavy trying to find a position to drive screws while not breaking any exterior parts. If someone walked in on me while I was putting it together, I imagine it would look like I was playing a weird looking cello.

#83 gives parts to complete the remaining winglet, provides pieces of the AA gun deck, and allows me to partially assemble the vertical missile launcher (which on the real Yamato was a smokestack):
20200930_231052_copy_798x614.jpg
20200930_231052_copy_798x614.jpg (89.06 KiB) Viewed 475 times

I guess I was expecting a little too much in hoping that the missile launcher would have a gimmick in opening up and showing ordnance inside. Instead, I get a choice of launcher top lids, one with closed silo doors and the other showing open silo doors with minimal detail. :x

I breathed a sigh of relief knowing that all the magnets that I installed up until now were oriented correctly- the winglets hold on well:
20200930_235346_copy_2124x1195.jpg
20200930_235346_copy_2124x1195.jpg (352.28 KiB) Viewed 475 times
Last edited by Valkyrie Hunter D on Thu Oct 01, 2020 8:36 am, edited 1 time in total.
User avatar
Valkyrie Hunter D
Corporal
Corporal
 
Posts: 40
Joined: Sat Feb 22, 2020 7:56 am
Karma: 4

Re: 1/350 Scale Space Battleship Yamato by Hachette

Postby Valkyrie Hunter D » Thu Oct 01, 2020 8:26 am

It's gonna be a hell of a time trying to work in there:
20201001_002140_copy_2124x1195.jpg
20201001_002140_copy_2124x1195.jpg (460.87 KiB) Viewed 474 times

With that, I'm all out of parts for now. 27 more issues to go!
User avatar
Valkyrie Hunter D
Corporal
Corporal
 
Posts: 40
Joined: Sat Feb 22, 2020 7:56 am
Karma: 4

Re: 1/350 Scale Space Battleship Yamato by Hachette

Postby steve131 » Sun Oct 04, 2020 7:39 pm

Wow that was some hard work but worth it looking good. 8-)
User avatar
steve131
Brigadier
Brigadier
 
Posts: 4315
Joined: Fri Aug 17, 2012 10:22 am
Karma: 65

Re: 1/350 Scale Space Battleship Yamato by Hachette

Postby Valkyrie Hunter D » Tue Oct 06, 2020 4:06 pm

steve131 wrote:Wow that was some hard work but worth it looking good. 8-)

It sure was, and it certainly has been a fun build.

There is still a solid 1/3 of the ship left to go with only 27 issues left-this will be interesting.
User avatar
Valkyrie Hunter D
Corporal
Corporal
 
Posts: 40
Joined: Sat Feb 22, 2020 7:56 am
Karma: 4


Return to Sci-Fi

Who is online

Users browsing this forum: No registered users and 1 guest