Iron Man Test

[corelki2005]

The led is tested

[corelki2005]

Finally what they call the vamp is affixed (magnetic cover)

[corelki2005]

The only downside I can see is the scale of the model

I think this model is around 1/3 scale as it is approx. 600mm tall. It should of been 1/2 scale 900mm tall, then it would be similar to the Terminator

At present I haven't decided whether to actual continue with this if it goes live.

[Mark]

That's looking really good. Looks nice quality and well finished.

[corelki2005]

issue 3 - the right gauntlet

the parts

[corelki2005]

first off the fingers and thumb are assembled

[corelki2005]

the diffuser was then added to the palm

[corelki2005]

the battery box was fitted to the outside of the palm

[corelki2005]

the fingers were then sandwiched between the two halves of the palm, the battery cover added and finally the hand guard attached

[corelki2005]

the gauntlet with the palm lit up

[corelki2005]

if this is a 4 issue test run then hopefully next week I should have the arc reactor

[corelki2005]

Issue 4 - the arc reactor - the last of the test issues

not a lot to do in this issue compared to the previous three.

parts

[corelki2005]

The inner ring and the diffuser were inserted into the main ring and then secured

[corelki2005]

the led was inserted into the support disc

[corelki2005]

a clear cover was then put over the led and the whole lot screwed together

[corelki2005]

the supplied batteries were then inserted, the cover attached and the switched on to test

[corelki2005]

there you have the four issues. If this goes live and after my routemaster is finished then I may subscribe to it

[steve131]

Did part one myself ,quality excellent and very much enjoyed doing it . Would be a fun build, into a cracking model.

[Narayan]

Thanks for posting, this looks interesting. Hopefully it will go live.

Graham